[KeyRepeat]
; 3.1 DelayCount = [1|30|60] (Default = 15)
; 3.2 RateCount = [1|30|60] (Default = 1)
; You can set the time after which the action will be repeated.
; 1 = 16ms
; 30 = 500ms
; 60 = 1s
DelayCount=15
RateCount=1
设置按键延迟，最好别乱修改。
[BacklightTimeout]
; Specified number. (unit of sec)
; Anything turns off the backlight when there is no key input.
; WhenStandby=FileClosed WhenPicture=BMP/Jpeg etc. WhenText=Text WhenSound=NSF/MP3 etc.
WhenStandby=10 ----------------无任务时
WhenPicture=15 ----------------浏览图片时
WhenText=30 -------------------阅读电子书时
WhenSound=10 ------------------播放音乐时
设置各种状态下关闭背光所需的时间（单位是秒）。
[Boot]
; Show/Hide windows. (0=Show, 1=Hide)
hiddenAboutWindow=0 -----------关于窗口
hiddenHelpWindow=0 ------------帮助窗口
hiddenDateTimeWindow=0 --------时间窗口
显示/隐藏各种窗口（0为显示，1为隐藏）
; 5.4 StartupSound = [0|1|2] (Default = 1)
; This is for defining if starting sound is played or not when starting MoonShell.
; Random starting sound will select randomly one mp3 from the folder to play.
; 0 = Starting sound off
; 1 = Starting sound on
; 2 = Random starting sound
StartupSound=1
设置系统启动声音，0为关闭，1为开启，2为随机
[Thumbnail]
; 6.1 Mode = [0|1|2|3] (Default = 3)
; Thumbnail and full screen preview settings.
; 0 = Off
; 1 = Only thumbnail preview
; 2 = Only full screen preview
; 3 = Thumbnail preview and full screen preview
Mode=3
设置图片浏览模式，0为关闭，1为只有缩小预览模式，2为只有全屏预览模式，3为缩小和全屏模式都有。
[TextPlugin]
; 7.1 SpacePixel = [N] (Default = 1)
; Defines distance between two lines of text in pixels.
; N can be any integer in [1..191-FontHeightInPixels] range.
SpacePixel=1
设置显示TXT文档时，每两行字之间间隔多少象素。
[NDSROMPlugin]
; 8.1 CrashMeProtection = [0|1] (Default = 1)
; DS destructive Trojan: 'Trojan.DSBrickA/B' can break your system to useless brick.
; MoonShell can check files before opening them. It only takes a second to check.
; It's not recommended to set this security check off.
; 0 = Protection Off
; 1 = Protection On
CrashMeProtection=1
设置开启防止nds变板砖的病毒的防护功能与否，0为关闭，1为开启。
; 10.2 ImageMode = [0|1] (Default = 0)
; Single or double screens can be used for displaying images. Double screen mode
; has a limited support.
; 0 = Single display mode
; 1 = Double display mode
ImageMode=0
设置图片模式，可以使用单屏或者双屏。0为单屏，1为双屏。
; 10.3 DrawFileInfo = [0|1] (Default = 1)
; The file informations are displayed in GUI, if there are informations.
; 0 = Hide informations
; 1 = Show informations
DrawFileInfo=1
设置显示文件信息与否，0为隐藏，1为显示。
; 10.4 VerticalPadding = [N] (Default = 96)
; The size of the space between upper and lower screen can be set when using Double
; display mode (value: ImageMode=1).
VerticalPadding=96
设置在双屏显示图片时，上屏和下屏间间隔多少像素。
[ClockPlugin]
; 11.1 Enabled = [0|1] (Default = 1)
; Displaying the clock plug-in.
; 0 = Hide
; 1 = Display
Enabled=1
设置使用时钟插件与否，0为不使用，1为使用。
; 11.2 RTC24Hour = [0|1] (Default = 1)
; Defining hour time format.
; 0 = 12-hour time format (with: AM/PM -letters)
; 1 = 24-hour time format
RTC24Hour=1
设置时间的表示格式，0为12小时制，1为24小时制。
上一页 [1] [2] [3] [4] [5] [6] [7] [8] 下一页
|
